Cetus FPV Pro Kit

Cetus FPV Pro Kit

Altitude Hold, Easy to Fly

The altitude hold function enables the Cetus quadcopter to Auto-Hover. The quadcopter can stay at a current height when pilots' hands are off the transmitter. The barometer/laser achieves accurate and stable positioning, which makes the quad hovering indoors very stable. Flying has never been so easy for a beginner.

The altitude hold function is only available in N mode.

Self-protection Function

The Cetus quadcopter has an excellent self-protection function. The drone can make an emergency landing whenever it loses control orhas a low battery. It will also automatically disarm and drop on the ground if it has a strong collision with another object. Say goodbye to losses!

Turtle Mode, Easy to Fly Away

When the quadcopter falls to the ground, upside down it can use active turtle mode from the LiteRadio2 SE transmitter to flip  over and resume flying. With this function, there is no need to to go to the drone to correct the position manually.
Turtle mode will not work effectively if something gets stuck in the motor/prop. Please push down switch SD on the transmitter immediately in this situation to exit turtle mode.

3 Flight Modes, From Zero to Hero

Three flight modes (N/ S/ M) are available to satisfy the different needs of pilots and to adapt to various flight environments. Whether you're a seasoned FPV pilot or a complete beginner, the Cetus Pro FPV Kit helps anyone fly confidently from day one. These 3 flight modes can be switched by one SB switch on transmitter, which is simple and convenient. All modes support 3 different speeds with SLOW/MID/FAST, pilots can switch it by one SC switch on the transmitter.

Cetus Pro Brushless Quadcopter

Equipped with the Lite 1-2S Pro brushless flight controller and 12A ESC, plus the matching 1102 18000KV brushless motors and 40mm 3-blade props, this drone is  absolutely more powerful and maneuverable. Turtle mode greatly makes FPV racing training smooth and convenient.

FPV Simulator Supported

LiteRadio2 SE radio transmitter can be used as a USB Joystick when connected to the computer. So it's available to play FPV simulators like EREADRONE. More convenient for practicing and charging at the same time. The transmitter is more ergonomic with a hobby-grade gimbal and rubber coat.

VR02 FPV Goggles

VR02 FPV Goggles- the First-Person-View Goggles with simple operation and powerful function. Specially designed for FPV starters. It comes with built-in 5.8G 14DBI high-quality antennas, which receive stable and clear images even for long-range flights. The ergonomic design with a foam sponge faceplate and a three-sided adjustable headband allows it to fit your face and head perfectly.

Specifications

Positioning system: Optical flow/ Barometer/ Laser
Height positioning: Laser/ Barometer
Position locating: Optical flow (effective height 0.3-3m)
Accuracy of auto-hover: Horizontal ±0.2m, vertical ±0.3m (under no wind environment)
Receiver protocol: Frsky D8
Quad: Cetus Pro Brushless Quadcopter
Flight controller: Lite 1-2S Pro brushless FC
VTX: 25mW
Camera tilt degree: 30°
Camera: C02 FPV Micro Camera
Transmitter: Literadio2 SE Transmitter
TX mode: Mode 1 & Mode 2 optional
Goggles: VR02 Goggles
Motor: 1102-18000KV Brushless motor
Propeller: 40mm 3-blade 1.5mm shaft hole
Takeoff weight: 33.19g (without battery)
Power system: 1S
Battery: BT2.0 450mah 1S Battery (external)
Flight time: 4-5min
Flight distance: 80m (in wide & undisturbed environment)

Package includes

1x Cetus Pro Brushless Quadcopter
1x LiteRadio2 SE Transmitter (Frsky D8 Protocol)
1x VR02 FPV Goggles
2x BT2.0 450mAh 1S Lipo Battery
1x BT2.0 Battery Charger and Voltage Tester
1x USB Charging Cable (Type-C)
1x Type-C Adapter
1x Prop Removal Tool
4x 40mm 3-blade Props
2x User Manual
1x Portable Storage Bag