The COVID 19 emergency may delay some of our deliveries due to increased delivery volume across Australia .  Some products may be intermittantly unavailable.

0

Your Cart is Empty

Yuneec Typhoon H Plus FAQ's

YUNTYHPEU - Typhoon H Plus Hexacopter, C23 camera, ST16S transmitter, 2x battery, charger, neck strap and sun shade for the ST16S, SD card and other accessories.

YUNTYHPREU 
Typhoon H Plus with Intel® RealSense™ technology, C23 camera, ST16S transmitter, 2x battery, charger, neck strap and sun shade for the ST16S, SD card and other accessories.

YUNTYHPRBPEU - Typhoon H Plus with Intel® RealSense™ technology, backpack, C23 camera, ST16S transmitter, 2x battery, charger, neck strap and sun shade for the ST16S, SD card and other accessories.

Before using your H Plus for the first time, read the operating instructions and inform yourself about the local laws. Prepare your equipment and find an area free of obstacles, buildings, people and animals. In our flight preparation and first flight tutorials, we'll explain you how to prepare yourself and your copter before the flight.

Go to the settings of the ST16S and tap on the "WiFi" icon. Select the correct camera and enter the password "1234567890" (unless otherwise specified).
You can find instructions on how to do this in the manual under "Binding the aircraft and C23".

Drone and remote control are already connected ex works. Normally, it is not necessary to establish a connection between them. If it should be necessary to set up a manual connection, you will find more information in our manual under " Binding the aircraft and ST16S".

Detailed instructions can be found in the instruction manual under "Compass Calibration".

Software updates can be accessed directly through a WiFi network and the ST16S remote control. In our tutorial on how to properly install an update, we will show you step by step how to proceed.
NOTE: Please note that Typhoon H updates are not compatible with Typhoon H Plus!

H.264
4096x2160 & 3840x2160 & 2720x1530 (24/25/30/48/50/60fps)
1920x1080 & 1280x720 (24/25/30/48/50/60/120fps)


H.265
4096x2160 & 3840x2160 (24/25/30fps)
2720x1530 (24/25/30/48/50/60fps)
1920x1080 & 1280x720 (24/25/30/48/50/60/120fps)

Class 10 u3 min. 90 Mbit/s

Built into the Intel® RealSense™ module, the camera detects movements and distances thanks to 3D and depth-sensing technology, enabling it to detect obstacles and fly around them.

The Typhoon H Plus comes with the C23 1 "sensor camera and is so far not compatible with any other YUNEEC cameras.

With Team Mode, you can independently control your copter and camera with two ST16S remote controls. The camera operator can thus concentrate on his own recordings while the pilot takes control of the drone. To be able to fully use the Team Mode function, you need an additional ST16S matching your existing system. That means, the Typhoon H Plus needs a second ST16S remote control with Flight Mode 2.0 app. Both systems, master and slave controller, need the to be updated to the latest firmware.

No, that’s not possible. The Typhoon H and the ST16 are based on completely different software and hardware and are therefore not compatible with the Typhoon H Plus.

Yes, the Typhoon H Plus is equipped with No Fly Zones, which prevent it from flying in no fly zones, for example near airports.

Yes, an external monitor can be connected via the HDMI connection of the ST16S remote control.